Made in full color. Finished in matte.

The actual printing process

The supplied factory manual specifies one-piece full-color resin printing. Finished pieces have a matte surface, a frosted feel and light layer lines. This standard route is not described as individually hand-painted.

These are decorative keepsakes. We do not claim food-contact, toy-safety or medical certification. Keep them away from young children, heat, direct sunlight and prolonged moisture.

A screen is not a printed surface

The factory describes approximately 10% color variation for ordinary colors and around 15% for brown, red and black. These are supplier reference estimates, not a measured color-matching guarantee.

Transparent glass, metallic shine and mirror reflections cannot be recreated. Matte resin gives a different appearance from a luminous screen.

Small size changes what is possible

Below 8 cm, glasses and very small accessories are not recommended because they can break in transit or handling. At 8 cm and above, supported accessories may be thickened for printing. Thin balloons, tassels, lanterns and floating strands remain high-risk.

The documented single-person Semi-realistic style is offered at 8 cm and 10 cm. It uses a stabilizing base; text support depends on the approved layout.

Fittings have their own rules

Ordinary figure charms can use an integrated printed loop or a screw-eye loop. Framed figure charms use an integrated loop. A normal charm size excludes the loop; a framed charm size includes it.

Rocker size measures the person and seat together, excluding the cloud base. The spring and cloud base are assembled by the factory. Available seat designs are horse, dragon, unicorn, moon and rocket.

Care for your keepsake

Handle it by the main body or base, not fine accessories. Use a soft dry brush or cloth. Avoid soaking, solvents, strong heat and dropping the figure. Pins, magnets and small fittings are not suitable for unsupervised children.